Technical Data
9.0
4
USB Power Supply
9.1
The Multi Switch is powered by means of a micro USB connection. When the device is plugged into a USB
power source, such as a USB charger, a laptop, or a power bank, the device will be powered and ready to use.
The Switch requires a minimal amount of energy. Some power sources are not designed to deliver minimal
current over long durations. Accordingly, proper device functionality is not guaranteed with any power
source.
Contact your dealer or mo-Vis for more information and for assistance with choosing the correct power source
for the Multi Switch.
Output
9.3
Input
9.2
The
Multi Switch
has a single 3.5mm
input jack, which is compatible with two
types of switches:
The
Multi Switch
is equipped with four green LEDs
on the device's face that indicate its output. They
indicate the channel currently selected, and shifts to
select the desired channel.
A separate green LED on the face of the device
indicates the device status.
When used with a splitter cable (sold separately), the
Multi Switch
is capable of four output functions.
Switch Type:
Input:
Mechanical
Use a switch equipped
with a 3.5mm mono jack
Proximity
Use mo-Vis
proximity sensors
Status:
LED Action:
Active
- Short blink, long pause
Fault
- Series of blinks, long pause
(error, see
troubleshooting
)
Outputs:
Location:
1,2
Green mono jack
3,4
Yellow mono jack
CAUTION
A ground loop can be introduced into the connection if the USB port and the input jack
are plugged into circuits powered by the same battery. This can cause a grounded current to
flow from one circuit to another through the Multi Switch, and if the current is too high,
the Multi Switch can be over-stressed and may not function properly, leading to permanent
damage to the device. One way to avoid introducing a ground loop to the connection is to
connect the device to an isolated USB power supply.
