StarTech.com SV1108IPEXEU User Manual Download Page 63

Page: 63 / 184

Instruction Manual

Item

Explanation

Permissions

Click to place/remove a check mark

next to an item to grant/withhold

access to that aspect of the

SV1108IPEXT/POW’s operation.

Win Client:

Checking Win Client allows

a user to access the SV1108IPEXT/POW

via the Windows Client software.

Java Client:

Checking Java Client allows

a user to access the SV1108IPEXT/POW

via the Java Client software.

View Only:

Checking View Only allows

a user to view the video of the display

of the computers attached to the ports

of the KVM switch connected to the

SV1108IPEXT/POW, but they are not

allowed to perform any operations on

the computers.

Configure:

Checking Configure gives

a user Administrator privileges, and

allows the user to set up and modify the

SV1108IPEXT/POW’s

operating environment.

Power Management:

Checking Power

Management allows a user to use the

SV1108IPEXT/POW’s built-in single

port power switch for remote power

management of a server/installation

connected locally to the SV1108IPEXT/

POW, as well as Power On / Power Off

/ Reset devices via an attached Power

Over the NET™ unit.

Log:

Checking Log allows a user to view

the contents of the log file.

Summary of Contents for SV1108IPEXEU

























































































































































































Search results

Summary of Contents for SV1108IPEXEU

Reviews:

Related manuals for SV1108IPEXEU

Brands by name

Popular brands

StarTech.com SV1108IPEXEU, User Manual

Search results

Summary of Contents for SV1108IPEXEU

Reviews:

Related manuals for SV1108IPEXEU

Brands by name

Popular brands