StarTech.com SV1108IPEXEU User Manual Download Page 73

Page: 73 / 184

Instruction Manual

Sessions

The

Session

page lets the administrator see at a glance all the users currently logged

into the SV1108IPEXT/POW, and provides information about each of their sessions.

The meanings of the headings at the top of the page are fairly straight forward.

The Client IP heading refers to the IP address that the user has logged in from.
The Service heading refers to the means the user employed to connect to the

SV1108IPEXT/POW (Browser, WinClient AP, JavaClient AP, etc.).
The Category heading lists the type of user who has logged in: Admin

(Administrator), User, or Select.

This page also gives the administrator the option of forcing a user logout by selecting

the user and clicking End Session.

Customization

The

Customization

page allows the Administrator to set

Timeout

Login failure

, and

Working mode

parameters.

Summary of Contents for SV1108IPEXEU

























































































































































































Search results

Summary of Contents for SV1108IPEXEU

Reviews:

Related manuals for SV1108IPEXEU

Brands by name

Popular brands

StarTech.com SV1108IPEXEU, User Manual

Search results

Summary of Contents for SV1108IPEXEU

Reviews:

Related manuals for SV1108IPEXEU

Brands by name

Popular brands