SV1105IPPCI Product Guide
9
CHAPTER 1 – INSTALLATION
This chapter describes how to connect the Remote Server Management over IP card and cables to a host computer.
Verifying system requirements
A number of hardware and software configurations are supported for host and client computers. Verify that your
computers match the requirements listed in the Overview chapter, Requirements section.
Installing the Remote Server Management over IP card
There are two types of cables included with your SV1105IPPCI: one black, multi-ended KVM cable and two red/black
braided power/reset cables.
The KVM cable includes one main KVM connector (black) and two sets of joined KVM cables (each consisting of one
blue monitor, one green mouse, and one purple keyboard connector). The shorter KVM cable set uses female
connectors. The longer KVM cable set uses male connectors.
The following is an overview of the Remote Server Management over IP card cables and their functions:
Main KVM connector
– uses the Remote Server Management over IP card KVM port to route signals through the
KVM cable sets.
Short cable set / female connectors
– passes local KVM signals to the Remote Server Management over IP card.
The short cable set connects to your keyboard, monitor, and mouse.
Long cable set / male connectors
– passes host KVM signals from the host computer to the Remote Server
Management over IP card. The long cable set connects to the keyboard, monitor, and mouse ports on your host
computer.
Host computer reset and power on/off cables
– enables host computer reset and power control from the Remote
Server Management over IP Web Server.
Summary of Contents for SV1105IPPCI
Page 1: ...Actual product may vary from photo...
Page 3: ......
