SV1105IPPCI Product Guide
15
IP Addr: 192.168.1.254
Gateway: 192.168.1.1
Netmask: 255.255.255.0
Using a static IP address
The Remote Server Management over IP card firmware ships with the following preconfigured static IP address:
You can use the card on a subnet that matches the factory-configured static IP address or use the Remote Server
Management over IP Web Server Device Configuration web page to change the IP address.
Changing the static IP address
You can modify the Remote Server Management over IP card IP address, gateway, and subnet mask to those you
want to use.
To change the static IP address, gateway, and subnet mask
1
Close any open Remote Server Management over IP Viewer launch sessions for the card you want to access.
2
From a web browser Address bar, enter the IP address of the Remote Server Management over IP card and
click Enter.
3
Log in to the Remote Server Management over IP Web Server as
admin
or as a user with Administrator rights.
4
From the Device Configuration tab, enter the new IP address, gateway, and subnet mask information, click Apply
Settings, and then log in to the new IP address.
Summary of Contents for SV1105IPPCI
Page 1: ...Actual product may vary from photo...
Page 3: ......
