7
Science First
®
/
STARLAB
®
• 86475 Gene Lasserre Blvd, Yulee, FL 32097 USA
800-875-3214 • 904-225-5558 • FAX 904-225-2228 • www.starlab.com
1. Hit the “power” button twice on the projector (in the button panel) or on the remote to turn off the
projector. It is important to leave the projector plugged in for a few minutes! This allows a fan to cool
the bulb. Failure to do this may decrease the life of the bulb. During this period, you can pack up the
other equipment.
2. Replace the cap on the fisheye lens.
3. Shut down the computer. To do so, close all applications then choose “Shut Down” under the Apple
icon on the menu bar at the top of the screen (far left).
4. Unplug the speakers.
5. Unplug the power strip from the wall then remove all of the cords.
6. Remove all the cords from the computer and projector.
7. Make sure you have plenty of room and there are no trip hazards when removing the projector.
8. Remove the projector by lifting it straight up off the brackets and place it on a stable surface.
9. Next, undo the two latches connecting the top and bottom of the case and lay the latches flat.
10. Remove the bottom and lay it flat with the foam side up. Replace all of the components in their slots
as shown in photo below.
11. Replace the top of the case and secure all four latches. Lay the latches flat.
Digital
STARLAB
®
Speakers
Cables and accessories
Computer
Lift From Here
Shutting Down and Packing Up
Lift From Here
