3-7 Operational guide when using Macintosh operating system
If SR3610 hardware installation has been completed, you can turn on the power
again and connect this device to Macintosh.
1.Connect USB 2.0 cable to Macintosh operating platform that supports this device.
For examples, MAC G3, G4, G5, iBook
2.In case you’d like to connect SATA cable to Macintosh operating platform, SATA
interface PCI control card required.
3.Please connect power cord to power jack in the back of SR3610
4.Turn on the power of SR3610 and confirm whether the display on computer screen
is normal.
5. Turn on the power of Macintosh platform
6.Given that installation of driver for USB 2.0/SATA has been completed for
Macintosh platform,
7.Turn on the power of Macintosh platform
8.Please confirm SR3610 and USB 2.0 or SATA device are ready, and then assign this
RAID hard disk to partition and format.
9.How to operate partition and formatting on RAID drive are as follow:
Formatting (just like formatting function of PC)
9-1.Point cursor at tools menu on desktop, and select disk tools utility, the disk
tools window will appear paging files including several options (i.e.Repair
tool/Delete/RAID/Reinstallation)
9-2.If RAID drive is ready, RAID drive information will be appeared on the left
window
9-3.In case disk and various folders need to be deleted, please select RAID drive
-
28
-
