3-6 Operation Guide when using Windows operating system.
If SR3610 hardware installation has been completed, you can turn on the power again
and connect this device to PC.
1. Please connect power cord to power jack on the back of SR3610.
2. Connect USB 2.0 or SATA cable to the connection port of Windows operating
platform that supports this device.
3. Turn on the power of SR3610 and confirm whether the display on computer
screen is normal.
4. In a few seconds, system will automatically detect this device.
5. Verify and confirm whether the icon of this device is listed in the task bar of
Windows desktop.
When SR3610 and USB 2.0 or SATA device are already and to specify the RAID
operation mode is done, perform partition and formatting procedures on the hard-disk
using disk management tool in control panel of operating system before it could be
used.
If you use SATA/USB 2.0 device but your system does not support SATA/USB 2.0
transfer port, SATA/USB 2.0 interface PCI controller card is available for purchased
from us.
-
27
-
