3-2 How to Change and set up RAID mode
Depending on user’s requirement, SR3610 offers the option of RAID 0 and RAID 1.
Prior to select appropriate RAID level, please consider each option’s application as
whether the priority is for data safety (RAID 1) or storage space expansion capability
(RAID 0).
If the system’s default value is RAID
※
1，
please refer following steps to change
mode from RAID 1 to RAID 0.
1. LCD screen displays status of “Pri HDD ok & Sec HDD ok”
(Disk ready is on the primary deck: OK; Disk ready is on the secondary deck: OK)
2. Press “ENT” button once
3.LCD screen prompts to enter password “0000”
(The default password is “0000”)
4.To execute, press ”ENT” button for 4 times (It means agreeing with the
passwordbeing “0000”), and enters the next screen.
5. Press “
▼
” button twice, when the message “CHANGE RAIDMODE RAID -0” is
displayed on screen., press ”ENT ” button once.
6. When the message ”RAID- 0 MODE YES NO” appears on LCD screen,
7.If RAID 1 is desired to be switched to RAID 0 operation mode, press ”ENT ”button
-
17
-
