once.
8. Then, the system will display the message “DATA WILL LOSE YES NO”, if
you agree, press ” ENT” button once.
9. On the next screen, the message “RESET SYSTEM YES NO” will be
displayed, if you agree, press ” ENT” button once.
10. After you will hear the sound of a buzzer which means the system is following
your instructions to update RAID mode and perform data reconstruction.
In case you wish to switch RAID 0 to RAID 1, please follow above steps, when
the screen give you a prompts as “RAID- 1 MODE YES NO”, please
press ”ENT” button once, then follow the above steps to continue, and system will
update RAID mode and perform data reconstruction.
※
The button on the LCD panel introducing as below:
“
▼
” button
: It appoints that it the sames as “
down
” function when you want to
enter to “
next page
”
page or adjst the paramete.
“
▲
” button:
It appoints that it the sames as “
up
” function when you want to enter
to “
forward
” or adjust the parameter.
“ ENT ” button:
It appoints that it the same as “enter”function when you want to
enter the new parameter into the system.
-
18
-
