Manual Release
SRC-Frequencia shutter-release button (
9
) func-
tions in much the same way as the camera shutter-
release button.
1. Adjust Camera Settings
Connect SRC-Frequencia (p. 6) and turn the came-
ra on. Choose exposure mode, shutter speed, focus
mode, and shooting mode as desired.
2. Take Pictures
2.1. Press SRC-Frequencia shutter-release button
(
9
) halfway and check focus and exposure. The fo-
cus and release indicator will be lit in bright green.
And then click to take pictures. When the shutter
function is ON, the focus and release indicator is on
and stays red, the camera issues a “beep….” every
second. the RELEASE indicator (
8
) will flash, and
the display will show the duration the shutter was
open.
To keep the shutter-release button fully pressed for
bulb photography, slide the button to the HOLD
position. Slide it in the opposite direction to release
the lock.
En
En
Manual Release
The
shutter-release button( 9 )
functions in much the same way as the camera
shutter- release button.
SRC-ALBA
14
And the display will show the shutter has
opened the time.
To keep the shutter- release button fully
pressed for bulb photography, slide the
button to the
HOLD
position. Slide it in the
opposite direction to release the lock.
2.2
Release the button to end shooting.
The
shutter-release button can
be used when no batteries are inserted. The show
panel will remain off and no beep will sound.
SRC-ALBA
The shutter-release button can be used to release the
shutter manually while the timer is active. Timer count-
down (package so display panels, focus and the release
of the indicator light and beep). Continues during manual
release. If a manual release overlaps with an automatic
release, the shutter will remain open until both exposure
times have expired.
For Your Safety (2/2)
Read and follow all warnings and instructions provided by the manufacturer.
Do not short or disassemble.
Do not expose to flame or excessive heat.
Do not attempt to insert batteries upside down or backwards.
Batteries are prone to leakage when fully discharged. To avoid damage to the product, be
sure to remove the batteries when leaving the product unattended for prolonged periods or
when no charge remains.
Should liquid from the batteries come into contact with skin or clothing, rinse immediately with
fresh water.
3
1.Adjust Camera Settings
Connect the
(pg.6) and turn the
camera on. Choose exposure mode, shutter speed,
focus mode, and shooting mode as desired.
2. Take Pictures
2.1
Press the
SRC-ALBA
shutter-release button
( 9 ) halfway and check focus and exposure,
Focus and the release of bright green light.
And then click to complete their photographs.
When the shutter opens, Focus and the release indicator
Lianghong Dengevery one second camera issued a beep,
the “
RELEASE
” indicator ( ) will flash, and
SRC-ALBA
8
2.2. Release the button to end shooting.
The SRC-Frequencia shutter-release button can
be used when no batteries are inserted. The
show panel will remain off and no beep will
sound.
The shutter-release button can be used to re-
lease the shutter manually while the timer is
active. Timer count-down (including display pa-
nels, focus and release of the indicator light
and beep). Continues during manual release.
If a manual release overlaps with an automatic
release, the shutter will remain open until both
exposure times have expired.
14
EN
FR
ES
