Star-Oddi Starmon Mini User Manual Download

Page: 81 / 92

User Manual

SeaStar Graphic Supporting Software

Page 81

Set an alias for the sequence and enter a description. Click OK and the sequence will

be added to the group (see figure 13.5).

Figure 13.5 Group view pane

If a group is open when starting up a logger the new measurement sequence will be

automatically registered in the group. If no group is open the sequence will not be

registered in any group.

Retrieving data

When retrieving data from a logger and the sequence is already in a group the data

retrieval time is registered in the group. Also when the data is converted/reconverted a

copy of the *DAT file is stored in the group folder.

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

Summary of Contents for Starmon Mini




























































































Search results

Summary of Contents for Starmon Mini

Reviews:

Related manuals for Starmon Mini

Brands by name

Popular brands

Star-Oddi Starmon Mini, User Manual

Search results

Summary of Contents for Starmon Mini

Reviews:

Related manuals for Starmon Mini

Brands by name

Popular brands