User Manual
SeaStar Graphic Supporting Software
©2014 Star-Oddi. All Rights Reserved
Page 16
If the user wants to program many recorders with the same sampling interval and start
time, it is recommended to select Multi mode. By choosing Multi mode, the settings
are fixed; giving each recorder connected to thereafter, the same settings. The
recorders that are connected to, following the first recorder, automatically get the
same settings as the first recorder. This saves time in the programming process. The
multi mode can be deactivated by clicking Cancel when connecting to the recorder
(see figure 4.7).
Figure 4.7 Multi Start Mode
The three buttons Use Template, Use Sequence, and Previous are not commonly
used. They can be used when one wants to use a previously programmed sequence.
The Use Template can be used if older definitions have been saved by enabling the
been set up in the past. With the Use Sequence button it is possible to get same
settings as from other recorders, by browsing for their serial no. By hitting the
Previous button the settings go back to previous, before changes were made. To read
more about templates see chapter 7.
After the settings have been selected, press the OK button.
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524