Star-Oddi Starmon Mini User Manual Download

Page: 30 / 92

User Manual

SeaStar Graphic Supporting Software

Page 30

A one line description/comment is available for the user to fill out in the Reconvert

data menu. This description is placed in line two of the CIT file.

Figure 5.9 Statistics in CIT File

Out of Range (OOR)

This text file shows the number of measurements recorded that were outside the

calibration range.

Binary Data (DAB)

This file contains raw data of the measurements in the data file. Calibration files are

not calculated into the data.

View DAB Files as Trend

When converting the DAD -> DAT the DAB file is created simultaneously.

-4095.

These values originate from the recorders 12 bit ADC (Analog to Digital Converter).

It can be of interest to view the data in its native form, for example to spot

saturation/out of range intervals.

The DAB can be viewed graphically as a trend via:

\Data Trend and Table\

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

Summary of Contents for Starmon Mini




























































































Search results

Summary of Contents for Starmon Mini

Reviews:

Related manuals for Starmon Mini

Brands by name

Popular brands

Star-Oddi Starmon Mini, User Manual

Search results

Summary of Contents for Starmon Mini

Reviews:

Related manuals for Starmon Mini

Brands by name

Popular brands