User Manual
SeaStar Graphic Supporting Software
©2014 Star-Oddi. All Rights Reserved
Page 21
5.
View Data
This chapter describes how to open a data file and the options available in SeaStar for
viewing the data.
5.1
Open Data
To open an existing data file that has already been retrieved, do the following:
1.
Choose the File menu and the Select Recorder command. When a recorder
has been selected, its serial number will be displayed in the blue top bar of the
software.
2.
Select the data file by choosing the File menu and the Select Measurement
command.
The name of the data file consists of the number of times the recorder has been set up
to measure plus the serial number of the recorder. When the data file (.mid) has been
selected, the chart and data tables are opened. The following figure shows a chart
and data table which have been opened:
Figure 5.1 Chart and Data Table of an open File
At the bottom of the SeaStar window you can view the measurement sequence
number, which indicates the number of times the recorder has been set up to
measure.
5.2
Import
Data files from other recorders than Starmon can be imported into SeaStar and
viewed as charts and tables. The imported file must be a text file with the extension
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524
