Star-Oddi Starmon Mini User Manual Download

Page: 28 / 92

User Manual

SeaStar Graphic Supporting Software

Page 28

Recorder Information (RIT)

This is a text file containing basic information about the recorder, serial number,

production date, estimated battery life etc.

Recorder Calibration Information (RCI)

This text file contains information about the calibration constants of the recorder,

calibration range of the parameters. The range is both showed as decimal values (DV)

and unit values (UV). The survival depth of the recorder is also shown.

Recorder Download Information (RDT)

This text file contains information about the measurement sequence that was last

downloaded into the recorder, including the start time, sampling interval and the

measurement sequence number.

Viewing Text Files

Under <View\Text files> the user can select a text file, via a file browser, for viewing.

This option is meant to give the (advanced) user a chance to view files that are not

directly supported for viewing in SeaStar, but are a part of the SeaStar

documentation system.

The files that the file browser accepts must have the following extensions:



TXT

Frequently, users copy SeaStar data to text processors and spreadsheets, like

Word and Excel, and later save the data as TXT files for viewing in other

applications.



INI

There are a number of INI files that SeaStar uses for store settings. These files

The latest members in

the INI files family are the Template files.



DAD

This is the original data file. It contains the raw data (in Ascii format) retrieved

from recorder. The DAD together with the MID are converted to the DAT file.

A word of warning: The DAD file should never be tempered with, as that might

give cause to erroneous data conversion.



CCT

Every time SeaStar

clock data are stored in a <recorder name>.CCT file.



CCD

Every time SeaStar connects to a recorder, the

time are compared to the last CCT, if found, and stored in <recorder

name>.CCD file, <measurement sequence name>.CCD.



NMS

Upon completion of a NMS editing session, estimation of memory and battery

usage is calculated and the results placed in a NMS file, which is then

displayed to the user.

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

Summary of Contents for Starmon Mini




























































































Search results

Summary of Contents for Starmon Mini

Reviews:

Related manuals for Starmon Mini

Brands by name

Popular brands

Star-Oddi Starmon Mini, User Manual

Search results

Summary of Contents for Starmon Mini

Reviews:

Related manuals for Starmon Mini

Brands by name

Popular brands