Star Headlight & Lantern LCS850MG, Installation And Instruction Manual

Page: 8 / 64

-5-
Installation: Dip Switch Settings
Control Head Dip Switch Settings
(cont’d)
Buzz, Gun Lock, TD Mode, AUX Input Function
BUZZ ( Beep Settings)
By default, every time a button is pressed on the keypad, the unit beeps.
Flip the BUZZ DIP switch up to deactivate this feature.
Please note: There is also an optional 10-second beep setting that can
be set to beep every 10 seconds when ANY function is active. The
optional 10-second beep function will not work if this switch is in the UP
position (see page 18 of the
Detailed Programming section for further
details) .
Detailed DIP Switch Information
B
U
Z
Z
K eypad Beep
Silent
1
Gun Lock
Button(s)
No Gun Lock
Button(s)
G
U
N
D
IS
A
B
L
E
2
T
D
M
O
D
E
Using
Traffic Director
Not Using
Traffic Director
3
A
U
X
Activates
Air Horn
Activates
Manual Function
4
TD Mode (Traffic Director Mode On/Off)
GUN DISABLE
PB14 is defaulted as a 10 second “Gun Lock” button. If you will not
be using the Gun Lock option, flip switch 2 down. PB14 will then
become a standard ON/OFF button.
AUX (Auxiliary Wire Input Function)
Normally the siren Air Horn can be activated by using the vehicle
horn switch (or other external switch) to apply +12VDC to the
auxiliary input
(terminal 7 of the 12-terminal connector, see pages
43-44) .
If you instead prefer to have the AUX wire activate your Manual
function, flip DIP switch 4 up.
NOTE: If the AUX wire DIP switch is set for the MANUAL function
(and the HRT is connected), neither your vehicle horn, nor
the siren Air Horn will sound when you press your steering
wheel horn during a siren tone.
PB13 is normally used to control an approved traffic director
(arrowstick) by scrolling through the four main traffic directing patterns:
WARN, LEFT, RIGHT, and CENTER OUT. Flip DIP switch 3 up to
disable the traffic director mode and to use
PB13 for ON/OFF control
of the PB13 output (see wiring diagram on page 41) , .