Star Headlight & Lantern LCS850MG, Installation And Instruction Manual

Page: 36 / 64

-29-
Installation: Optional Settings
Horn Ring Transfer (HRT) Options
Normally, if you have the HRT connected you can control the siren any time it is on using the
vehicle horn (switch).
If instead, you would like the ability of the vehicle horn/HRT to ONLY change the tone once
the slide switch or certain buttons are activated, change this setting.
If PB3 is Green : (Default setting) The HRT function will operate any time the siren is on.
If PB3 is Red : The HRT feature will only operate when the buttons programmed (described
below) are activated. (By default, if PB3 is Red, the HRT function will be
operational any time the Slide Switch is moved to
1 1 1 1
,
2 2 2 2
,
or
3 3 3 3
).
If PB3 is GREEN, move to the next option or flip the PGM DIP switch down
to save the changes.
If PB3 is RED, you may need to proceed below to program the functions
necessary for the HRT to function. If the default setting of any Slide Switch
position activating HRT is acceptable, you can skip the Advanced Slide
Switch Programming section below.
A
d
v
a
n
c
e
d
H
o
rn
R
in
g
T
ra
n
s
fe
r
P
ro
g
ra
m
m
in
g
If you need to select which buttons or slide switch positions will enable functioning of the
HRT mode, proceed below.
PB1-PB14 are Red : If any of the functions tied to each Red button (PB1-PB14) are
activated, the HRT function is available.
MAN is Red : (Default setting) If SS
3 3 3 3
is activated, the HRT function is
available.
HORN is Red : (Default setting) If SS
1 1 1 1
or SS
2 2 2 2
is activated, the HRT function
is available.
PB1-PB14, HORN, MAN
are Green : (Default for PB1-PB5, PB13, PB14) These buttons
(PB1-PB14) or SS positions will have no effect on
whether or not the HRT function is available.
Once you have programmed all necessary options, you must flip
the Programming Mode DIP switch down to save the changes.
Once you have programmed all necessary options, you must flip
the Programming Mode DIP switch down to save the changes.
Horn Ring Transfer (HRT) Active Mode
Programming Mode DIP Switch: Up
Slide Switch:
2 2 2 2
Activate this button (RED): WAIL
And modify these buttons: PB1-PB14, HORN, MAN
Programming Mode DIP Switch: Up
Slide Switch:
2
2 2
2
Audio Mode Buttons (HF/WAIL/YELP/PHSR/RADIO): All OFF/Green
And modify this button: PB3
All of the options on pages 17
All of the options on pages 17 All of the options on pages 17
All of the options on pages 17----34 can optionally be programmed using free software and a
34 can optionally be programmed using free software and a 34 can optionally be programmed using free software and a
34 can optionally be programmed using free software and a
USB to serial cable (P/N SUSB USB to serial cable (P/N SUSB USB to serial cable (P/N SUSB USB to serial cable (P/N SUSB----850MG) available upon request from StarSignal at 585 850MG) available upon request from StarSignal at 585 850MG) available upon request from StarSignal at 585 850MG) available upon request from StarSignal at 585----226 226 226 226----9787. 9787. 9787. 9787.