Star Headlight & Lantern LCS850MG, Installation And Instruction Manual

Page: 38 / 64

-31-
Installation: Detailed Programming
Slide Switch Options Auto-Off
Traffic Director Visual Pursuit
A
d
v
a
n
c
e
d
S
li
d
e
S
w
it
c
h
P
ro
g
ra
m
m
in
g
By default, any of the additional button functions that you have programmed (as
described on the previous page) to auto-activate with the various slide switch positions,
will DE-ACTIVATE once you move the Slide Switch out of the corresponding position.
(Note: This only applies to the button or slide switch outputs, it does NOT apply to the
Audio Pursuit or TD Pursuit options.)
If you want the functions to continue to stay on , once the slide switch is moved out of the
corresponding position, change this setting.
If PB2 is Green : (Default setting) Push button functions that are auto-activated
with the slide switch will turn off when the slide switch is moved
out of the corresponding position.
If PB2 is Red : Push button functions that are auto-activated with the slide
switch will stay on until the button each is associated with is
pressed.
Normally, moving the slide switch to position
3 3 3 3
will automatically activate your traffic director
in Warn mode (unless you have disabled it using Control Head DIP switch 6/Visual Pursuit as
described on page 6). Optionally, you can select or deselect which slide positions will auto-
activate the Traffic Director.
If you would like to add or remove slide positions that auto-activate
the Traffic Director, change this setting.
(Use the PB1 button to program for slide position
1
1 1
1
,
use the PB2 button to program for slide position
2
2 2
2
, and
use the PB3 button to program for slide position
3
3 3
3
)
Button is Red : (Default setting for PB3/SS
3
3 3
3
) The Traffic Director will automatically
activate into the Warn pattern whenever the Slide Switch is in this
position.
Button is Green : (Default setting for PB1/SS
1 1 1 1
& PB2 /SS
2 2 2 2
) This Slide Switch position
has no effect on the Traffic Director.
Once you have programmed all necessary options, you must flip
the Programming Mode DIP switch down to save the changes.
Once you have programmed all necessary options, you must flip
the Programming Mode DIP switch down to save the changes.
Slide Switch Options Auto-Off
Traffic Director Visual Pursuit
Programming Mode DIP Switch: Up
Slide Switch:
1 1 1 1
Audio Mode Buttons (HF/WAIL/YELP/PHSR/RADIO): All OFF/Green
And modify this button: PB2
Programming Mode DIP Switch: Up
Slide Switch:
2 2 2 2
Activate this button (RED): PHSR
And modify any of these buttons: PB1, PB2, or PB3
All of the options on pages 17
All of the options on pages 17 All of the options on pages 17
All of the options on pages 17----34 can optionally be programmed using free software and a
34 can optionally be programmed using free software and a 34 can optionally be programmed using free software and a
34 can optionally be programmed using free software and a
USB to serial cable (P/N SUSB USB to serial cable (P/N SUSB USB to serial cable (P/N SUSB USB to serial cable (P/N SUSB----850MG) available upon request from StarSignal at 585 850MG) available upon request from StarSignal at 585 850MG) available upon request from StarSignal at 585 850MG) available upon request from StarSignal at 585----226 226 226 226----9787. 9787. 9787. 9787.