Star Headlight & Lantern LCS850MG, Installation And Instruction Manual

Page: 21 / 64

-18-
Installation: Detailed Programming
Button Operation (Latched or Momentary)
Auto Beep Option
If you would like any of the buttons to act as a “momentary” pushbutton switch instead (ON
only while held in), change this setting.
Button is Green : (Default setting) Button operates as a standard ON/OFF button.
Button is Red : The button will operate as a momentary switch.
Each button ( PB1-PB5, PB13, PB14 ) can be programmed independently of the others.
Please Note: You must have the BUZZ DIP switch (#1) on to use this feature (see page 5).
This feature is designed to alert the user that devices which may not be noticed by the user,
are still active. If you would like the unit to beep every 10 seconds when any function is
active, change this setting.
PB5 is Green : (Default setting) No Auto-Beep.
PB5 is Red : Unit Beeps every 10 seconds whenever any functions are activated.
Once you have programmed all necessary options, you must flip
the Programming Mode DIP switch down to save the changes.
Once you have programmed all necessary options, you must flip
the Programming Mode DIP switch down to save the changes.
Button Operation (Latched or Momentary)
Auto Beep When Any Function Is Active
Please Note: You must have the TD MODE DIP switch (#3) set to use the Traffic Director in
order to use this feature (see pg. 5).
When using the TD CYCLE button ( PB13 ) to scroll through the traffic directing patterns, the
patterns will cycle from WARN►LEFT►RIGHT►CENTER OUT►OFF and repeat. If you
desire to remove the WARN pattern from the cycle, change this setting.
MAN is Green : (Default setting) WARN is included in TD cycle.
MAN is Red : TD button will cycle only LEFT►RIGHT►CENTER OUT►OFF
and repeat.
WARN Pattern Excluded From TD Pattern Cycle
Once you have programmed all necessary options, you must flip
the Programming Mode DIP switch down to save the changes.
Programming Mode DIP switch : Up
Slide Switch: Off
Activate this button (RED): PHSR
And modify any of these buttons: PB1-PB5, PB13, PB14
Programming Mode DIP switch: Up
Slide Switch: OFF
Audio Mode Buttons (HF/WAIL/YELP/PHSR/RADIO): All OFF/Green
And modify this button: PB5
Programming Mode DIP switch: Up
Slide Switch:
1 1 1 1
Audio Mode Buttons (HF/WAIL/YELP/PHSR/RADIO): All OFF/Green
And modify this button: MAN