22
10. Stanley NUA Electric accessories
Accessories in your Stanley
1 x Large Size Roasting Tin / Grill Pan (Fig. 10.1)
This tin can be used as a grill pan for the grill.
This is designed to slide onto the oven runners without the
need for it to sit on an oven grid shelf. The roasting tin can be
used with the grill rack, in its high position, for grilling at the
top of the roasting oven. It can be used for roasting meat, or
poultry with or without the grill rack.
1 x Half Size Roasting Tin / Grill rack (Fig. 10.2)
This tin can be used as a grill pan for the infrared grill.
This tin can be slid onto the oven runners width-ways or can
sit on an oven grid shelf. The half size roasting tin can be used
with the grill rack, in its high position, for grilling at the top of
the roasting oven.
1x Floor Grid (Fig. 10.3)
This grid is used on the floor of the upper oven, in particular
the roasting and simmering ovens to protect food needing
over 30 minutes cooking from the intensity of the heat from
the base element.
3x Oven Shelves (Fig. 10.4)
These are for the Bake / Simmer, warming oven and grill
cavity.
1x Wire Brush (Fig. 10.5)
This is for cleaning the raw cast iron surface of the Hotplate
keeping them clear of crumbs and burnt on debris – which
would otherwise affect the boiling performance of pans and
the kettle. Only use on the hotplate. Take care not to touch
the enamel surfaces as the wire brush will scratch the finish.
Fig. 10.1
Fig. 10.2
Fig. 10.3
Fig. 10.4
Fig. 10.5
