INTRODUCTION
Congratulations on purchasing this fine Irish made Oil Fired cooker which is built to exacting standards and will
give you every satisfaction in use.
This appliance is hot while in operation and retains its heat for a long period of time after use. Children, aged
or infirm persons should be supervised at all times and should not be allowed to touch the hot working surfaces
while in use or until the appliance has thoroughly cooled.
Please read the Operation & Installation Instructions provided before operating the cooker.
To ensure safety, satisfaction and reliable operation, this quality cooker should be installed and commissioned
by a trained and competent person. The Domestic Hot Water facility involved must conform fully to good plumb-
ing practice, established standards and OFTEC Recommendations.
The complete installation must be done in accordance with current Standards and Local Codes. It should be
noted that the requirements and these publications may be superseded during the life of this manual.
1.
Burner Compartment
2.
Air Intake Spin Valve
3.
Burner Viewing Glass
4.
Hot Plate
5.
Chimney Damper
6.
Fire Valve Phial
7.
Oven Door
8.
Cleaning Door
9.
Hob
10.
Bonnet Door
11.
Spin Valve
12.
Oil Control Valve
13.
Oil Control Valve
Cover
14.
Fire Valve Bracket
IMPORTANT - CONTROL OF SUBSTANCES HARMFUL TO HEALTH
It is the users/installer responsibility to ensure that the necessary personal protective clothing is worn
when handling materials that could be interpreted as injurious to health and safety.
When handling firebricks, fire cement or fuels use disposable gloves. Exercise caution, use dispos-
able masks and gloves when handling glues and sealants. When working with kerosene oil, fibre
glass or mineral wool. Avoid contact with skin, eyes, nose and throat, use disposable protection.
This cooker is designed for continuous or intermittent use. When cooker is in continuous use, it should
be serviced at least every 6 months. If it is not used for extended periods, the service period may be
extended.
The manufacturers reserve the right to make alterations to design, materials or construction for manufacturing or other reasons, subsequent to publication.
2
Fig.1
