Tractor Wheel Settings
Both front and rear tractor wheels must be set to run down the centre of the
wheelings and must span the bed being lifted. Consult your tractor handbook for the
correct procedure for setting the tractor wheels.
When carrying out wheel adjustments, always place the jack on firm
ground under a solid part of the tractor. Before removing a wheel, place
a stout support under the tractor frame in case the jack should become
dislodged.
Drawbar
The drawbar (item 1, fig 1) is designed to be attached to the tractor’s swinging
drawbar. The tractor drawbar should be fixed in its central position. Consult the
tractor manufacturer’s handbook for details. The machine drawbar eye should be
checked regularly to ensure it is free moving and kept greased to prevent excessive
wear.
The machine must be connected to the tractor using the proper type
and size of pin which should be securely fixed by the correct means.
This will ensure that it cannot be accidentally pulled or pushed out of
place whilst the machine is in use.
The stand (item 2, fig 1) is provided so that the machine is held at a suitable height
for safely coupling to the tractor. To adjust the height, connect the hydraulic hoses to
the tractor and open the drawbar transport lock valve (item 3, fig 1). Operate the
control box share depth control to achieve the correct drawbar height.
Once securely attached to the tractor, raise the machine and remove the stand
locking pin (item 4, fig 1). Store the stand on the LH side of the front chassis using
the locking pin.
When disconnecting from the tractor always ensure the stand is
positioned on firm ground. Both wheels should be chocked at front and
rear before removing the drawbar pin. Always store the stand on the
machine. You never know when it will be needed.
1.7
INSTALLATION
Fig 1
Summary of Contents for MEGASTAR GEN-2
