Vari-Flow Web (optional)
The push button starts/stops the vari-web. The LED is illuminated when the unit is
running. The dial increases/decreases the speed of the web. Turn the dial clockwise
to increase or anticlockwise to decrease the speed.
Machine Wheel Settings
The machine wheels must be set for work in a specific bed width. The wheels should
be set to match the tractor wheels.
Each wheel is carried by a wheel leg pillar (item 2, fig 5) The pillars have a top and
bottom flange plate containing a series of fixing holes. Moving the pillars in or out
adjusts the wheel centres to suit the selected bed width. Both wheel legs must be set
to the same hole positions so that the wheels remain symmetrical about the centre-
line of the machine (see figure 7). Lifting equipment must be used when setting the
wheels.
Before commencing axle adjustment, ensure adequate jacks, axle
stands of minimum 2500 kg capacity, wheel chocks and suitable lifting
equipment are available.
It is important that the machine is correctly fitted to the tractor and that
the tractor handbrake is applied whilst axle adjustments are made.
Place chocks at the front and rear of the opposite side wheel to the one being
adjusted. Jack up the machine and place an axle stands under the chassis and lower
the jack to allow the axle stands to take the weight of the machine.
OPERATION
1.12
Fig 5
Fig 6
Summary of Contents for MEGASTAR GEN-2
