Starting Off Your Machine
Before commencing work, whether starting off a new machine or starting work in a
new field, it is advisable to carry out the following checks.
1.
Is the machine connected correctly to the tractor ?
2.
Is the front end of the machine set correctly for the bed width being lifted ?
3.
Are the wheel settings correct on both machine and tractor ?
4.
Is the transport lock valve on the depth ram in the open working position ?
5.
Has the depth roller transport strap been removed ?
When satisfied that the tractor and machine are set up correctly, then commence
work. Work the machine for approximately 30m and stop. Do not run the machine
out. Leave the soil on all sections of the machine. By a series of visual checks you
can assess how the machine settings are performing. Check for correct depth by
digging into the formed bed.
Getting the Best Results From Your Machine
Advice and hints to help accomplish best performance and maximum output.
1.
Ensure the tractor tyres are not too wide or they may crush the side of the
ridges.
2.
Ensure the tractor drawbar pin is not too long or it may drag and bunch up soil
and weed.
3.
Ensure correct forward speed of tractor to match the conditions and machine
capabilities.
4.
Ensure the shares are clean and shiny and that the share bolts do not
protrude above the share blades. This will reduce drag and help with the flow
in front of the machine.
5.
Keep the share frame area clean in wet and heavy conditions. This will help
prolong the life of the front roller and first row of stars and will reduce the load
on the drive system.
6.
Ensure the discs are set to the correct depth. Too much depth will cause soil
to slab and encourage soil to stick to the discs and prevent them turning.
7.
Ensure the correct width of depth roller is fitted to your machine for the width
of your beds.
8.
Do not apply too much pressure on the depth roller as clods may be produced.
Only enough pressure to keep the roller turning is necessary in most
conditions.
1.19
OPERATION IN THE FIELD
Summary of Contents for MEGASTAR GEN-2
