Standart Horizont GX2000, Owner'S Manual

Page: 86 / 136

GX2000/GX2100 Page 86
12.9 MAGNETIC
This selection allows customizing the GPS COG (Course Over Ground) dis-
played in True or Magnetic.
NOTE
A GPS must be connected to the radio to be able to show COG.
1. Press and hold down the [ CALL
(
MENU
)] key until
“
Setup Menu
” appears, then select “
GENERAL SETUP
”
with the CHANNEL knob.
2. Press the [ SELECT
] soft key, then rotate the
CHAN-
NEL knob to “
MAGNETIC
”.
3. Press the [ SELECT
] soft key.
4. Rotate the CHANNEL knob to select “
TRUE
” or “
MAG-
NETIC
”.
5. Press the [ ENT
] soft key to store the selected set-
ting.
6. Press the [ QUIT
] soft key several times to return to
radio operation.
12.10 KEY BEEP
This selection is used to select the beep tone volume level when a key is
pressed.
1. Press and hold down the [ CALL
(
MENU
)] key until
“
Setup Menu
” appears, then select “
GENERAL SETUP
”
with the CHANNEL knob.
2. Press the [ SELECT
] soft key, then rotate the
CHAN-
NEL knob to select “
KEY BEEP
”.
3. Press the [ SELECT
] soft key.
4. Rotate the CHANNEL knob to select the desired
level. The beep level can be set from “
LEVEL 1
” to
“
LEVEL 6
”, “
HIGH
”, or “
OFF
”.
5. Press the [ ENT
] soft key to store the selected level.
6. Press the [ QUIT
] soft several times to return to ra-
dio operation.