Standart Horizont GX2000, Owner'S Manual

Page: 23 / 136

Page 23 GX2000/GX2100
O
FFSET
T
IME
T
ABLE
8.5 CHECKING GPS CONNECTIONS
After connections have been made between the
GX2000/GX2100 and the GPS, a small satellite icon
will appear on the top right corner of the display and
your current location (Latitude/Longitude) is shown on
the display.
NOTE
If there is a problem with the NMEA connection between the radio and
the GPS, the GPS icon will blink continuously until the connection is
corrected.
8.6 CHANGING THE GPS TIME
From the Factory the GX2000/GX2100 shows GPS satellite time or UTC time
when an optional GPS is connected. A time offset is needed to show the local
time in your area. The Time Offset must be changed in order for the radio to
display the current time in your area. Please see the Offset Time Table at the
bottom of this page.
1. Press and hold down the [ CALL
(
MENU
)] key
until “
Setup Menu
” appears, then select “
GEN-
ERAL SETUP
” with the CHANNEL knob.
2. Press the [ SELECT
] soft key, then select
“
TIME OFFSET
” with the CHANNEL knob.
3. Press the [ SELECT
] soft key, then rotate the
CHAN-
NEL knob to select time offset of your location. See
illustration below to find your offset time. If “
00:00
”
is assigned, the time is the same as UTC (Universal
Time Coordinated or GPS Satellite Time).
4. Press the [ ENT
] soft key to store the time offset.
5. Press the [ QUIT
] soft key several times to return to radio operation.