Standart Horizont GX2000, Owner'S Manual

Page: 93 / 136

Page 93 GX2000/GX2100
13.8 STATION NAME
This function allows you to change the name of the radio or second station
microphone. Example: “Radio - Cabin”, “RAM1 - Flybridge”.
1. Press and hold down the [ CALL
(
MENU
)] key until
“
Setup Menu
” appears.
2. Rotate the CHANNEL knob to select “
CH FUNCTION
SETUP
”.
3. Press the [ SELECT
] soft key, then select “
STATION
NAME ” with the CHANNEL knob.
4. Press the [ SELECT
] soft key.
5. With the second station microphone connected, ro-
tate the CHANNEL knob to select the Unit (“
Radio
”
or “
RAM1
”) to be named, then press the [ ENT
] soft
key.
6. Rotate the CHANNEL knob to scroll through the first
letter of the new channel name.
7. Press the [ ENT
] soft key to store the first letter in
the name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete.
The name can consist of up to 8 characters, if you
do not use all 8 characters press the [
ENT
] soft key
to move to the next space. This method can also be
used to enter a blank space in the name. If a mis-
take was made entering in the name repeat pressing the [
BACK
] key until
the wrong character is selected, then rotate the CHANNEL knob to correct
the entry.
9. Press and hold the [ ENT
] soft key to enter the name.
10. If you want to enter the name of the connected RAM3 or Radio, repeat
steps 5 through 9.
11. Press the [ QUIT
] soft key several times to return to radio operation.