Standart Horizont GX2000, Owner'S Manual

Page: 51 / 136

Page 51 GX2000/GX2100
to the last selected working channel.
4. Press the [ WPT
] soft key to enter the “
Waypoint In-
put
” menu, then enter the desired waypoint name
(up to 11 characters), described previously (select
the letter/number by rotating the
CHANNEL knob
and move the cursor by pressing the [ ENT
]/[
BACK
]
soft key).
6. The ID is the MMSI from the vessel in distress.
7. When you are finished entering the waypoint name,
press and hold the [ ENT
] soft key to replace the
display to the “WAYPOINT” Screen. The display in-
dicates the distance and direction of the distressed
vessel, and also the compass indicates the dis-
tressed vessel by dot (
).
8. To return to the radio operation:
1) Press and hold down the [ CALL
(
MENU
)] key until “
Setup Menu
” ap-
pears.
2) Rotate the CHANNEL knob to select “
DSC SETUP
” menu.
3) Press the [ SELECT
] soft key, then select “
GENERAL SETUP
” with the
CHANNEL knob.
4) Press the [ SELECT
] soft key, then select “
NORMAL
” with the CHANNEL
knob.
5) Press the [ SELECT
] soft key to return to radio operation.
NOTE
You must continue monitoring channel 16 as a coast station may re-
quire assistance in the rescue attempt.
Received DISTRESS
Name:VERTEX
ID:123456789
Since: 01:03
Nature of:Undesignate
DIST ID:123456789
QUIT WPT
-DISTRESS INFO-