Standart Horizont GX2000, Owner'S Manual

Page: 111 / 136

Page 111 GX2000/GX2100
16.5 SAVING A DSC POSITION CALL AS A WAYPOINT
When a position is received from a another DSC radio the GX2000/GX2100
allows the position to be saved as a waypoint.
1. After a position has been received, press the
[
SAVE
] soft key two times.
2. The first digit in the WPT Name will be flash-
ing, rotate the CHANNEL knob to the first let-
ter of the name you want to input.
3. Press the [ ENT
] soft key, then rotate the
CHANNEL
knob to select the second letter in the name.
4. Repeat step 3 until the name is shown.
5. Press and hold the [
ENT
] soft key until the radio
beeps to save the waypoint to memory.
6. Press the [ QUIT
] soft key several times to return to radio operation.
16.6 NAVIGATING TO A SAVED WAYPOINT
1. Press and hold down the [ CALL
(
MENU
)] key
until “
Setup Menu
” appears.
2. Rotate the CHANNEL knob to select “ GEN-
ERAL SETUP
”.
3. Press the [ SELECT
] soft key, then select “
DIS-
PLAY
” with the CHANNEL knob.
4. Press the [ ENT
] soft key, and select
“
WAYPOINT
”, and press the [ SELECT
] soft
key.
5. Select the waypoint name and press the [ ENT
]
soft key to show the waypoint data display.
6. Press the [ ENT
] soft key to start navigating
the waypoint and show the Waypoint Nav display.
NOTE
The radio must be connected to a GPS to be able to navigate to a
waypoint.