IGL15 Spare parts replacement manual
Version
：
S2018.05
29
6.
Adjust the spacer, and make each spacer has no contact with the brake and the machine case.
7.
Adjust(tighten or loosen) the bolt M8
×
100, make the gap between the static plate and the
dynamic plate: 0.30mm.
（
Attention: the gap position shown as the picture below; adjust and
check the No.2 and the No.4 at first, then the No.3 and No.1
）
.
8.
Adjust each spacer with the open-ended spanner( 16mm), make the gap
：
0.40mm.
（
Attention:
the gap position and the check order is the same as the previous step, adjust and check the
No.2 and the No.4 at first, then the No.3 and No.1
）
9.
Tighten the bolts
M8
×
100
diagonally with the torque: 15-20Nm
，
check the gap:
0.30-0.40mm.