IGL15 Spare parts replacement manual
Version
：
S2018.05
16
4.
Apply an appropriate amount of TONSAN 1243 thread adhesive to the
corresponding screw hole of screw M8×25, install the gland to the end face of
brake wheel, fix it with screw M8×25, tighten it with hexagon wrench (5mm),
and confirm with torque wrench that the tightening torque is 20Nm.
5.
Apply an appropriate amount of TONSAN 1243 thread adhesive to the
corresponding screw hole of screw M5×12, put waveform washer 120 into the
bearing hole of the machine base, then install the encoder cover to the end face of
the bearing hole of the machine base, fix it with screw M5×12 and washer 5,
tighten it with hexagon screw (4mm), and confirm with torque screwdriver that
the tightening torque is 5Nm.
6.
Install the encoder (refer to GTW7 permanent magnet synchronous elevator
tractor spare parts replacement manual - encoder replacement method)
.
7.
Power on and test traction machine.
Gland
Screw M8 x 25