Standard Horizon Quantum GX5000S Operating Manual Download Page 7 | Manualshive

Page: 7 / 69

background image

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

6 FCC

NOTICE

NOTICE

Unauthorized changes or modifications to this equipment may void compliance with FCC
Rules. Any change or modification must be approved in writing by Marine Division of Vertex
Standard.

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.

Vertex Standard Co., Ltd.

7

«
...
5
6
7
8
9
...
»

Summary of Contents for Quantum GX5000S






































































Reviews:

No comments

Related manuals for Quantum GX5000S

Brand: YouKits Pages: 1

Brand: Shure Pages: 24

Brand: M-system Pages: 4

Brand: dewert okin Pages: 3

Brand: Cactus Pages: 45

Brand: Nexa Pages: 41

Brand: R&S Pages: 112

Brand: Huazheng Pages: 19

Brand: Radio Shack Pages: 61

MAGNETIC Deluxe 1Rw

Brand: YOODA Pages: 2

Brand: YOKOGAWA Pages: 85

Brand: Yaesu Pages: 44

Brand: GbSat Pages: 52

Brand: ESCORT REDi Pages: 54

Brand: Nokeval Pages: 38

CMD5B1 010 Series

Brand: Greystone Energy Systems Pages: 4

Brand: Avermedia Pages: 1

Brand: Icom Pages: 53

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands