FCC ID: K6630283X3S
IC ID: 511B-30283X3S
GX5000S / GX5500S Operating Manual
persons you wish to call, similar to a cellular phones directory.
1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select “DSC Setup” menu.
3. Press the [ENT] key, then select “INDIV DIR” with the CHANNEL selector knob.
4. Press the [ENT] key, then select “Add” with the CHANNEL selector knob.
5. Press the [ENT] key.
6. Turn the CHANNEL selector knob to scroll to the first letter of the name of the vessel
or person you want to list in the directory.
7. Press the [ENT] key to store the first letter of the name and step to the next letter to
the right.
8. Repeat step 6 and 7 until the name is complete. The name can consist of up to
eleven characters, if you do not use all eleven characters press the [ENT] key to
move to the next space. This method can also be used to enter a blank space in the
name. To clear the previous letter, press the [CLR] key.
9. After the eleventh letter or space has been entered, press and hold the [ENT] key to
advance to the MMSI Maritime Mobile Service Identity Number number entry.
10. Turn the CHANNEL selector knob to scroll through numbers, 0-9. To enter the
desired number and move one space to the right press the [ENT] key. Repeat this
procedure until all nine spaces of the MMSI number are entered.
11. If a mistake was made entering in the name or the MMSI number repeat pressing
the [H/L(NAV)] key until the wrong character is selected, then move the channel knob
to correct the entry.
12. To store the data entered, press and hold the [ENT] key.
13. To enter another individual address, repeat steps 4 through 12.
14. To exit this menu and return to radio operation mode press the [16/9] key.
NOTE
Selecting “Next” or “Exit” will automatically save the name and MMSI number into memory.
11.5.2 Setting up Individual Reply
Allows setting up the radio to automatically (default setting) or manually respond to a DSC
Individual call requesting you to switch to a working channel for voice communications.
When Manual is selected the MMSI of the calling vessel is shown allowing you to see who
is calling. This function is similar to caller id on a cellular phone.
1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select “DSC Setup” menu.
Vertex Standard Co., Ltd.
35
