FCC ID: K6630283X3S
IC ID: 511B-30283X3S
GX5000S / GX5500S Operating Manual
4. Turn the CHANNEL selector knob to select time offset from UTC. See illustration
below to find your offset time from UTC. If “0:00” is assigned, the time is the same as
UTC (Universal Time Coordinated or GMT Greenwich Mean Time).
5. Press the [ENT] key to store the time offset.
6. Press the [16/9] key or turn the CHANNEL selector knob to select “Exit,” then press
the [ENT] key to return to the “Radio Setup” menu, select “Exit” and press the [ENT]
key to return to radio operation.
8.7 CHANGING THE TIME LOCATION
Sets the radio to show UTC time or local time with the offset inputted in section 7.5
Changing the GPS Time.
1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.
2. Press the [ENT] key, then select “Time Disp” in the “Radio Setup” menu with the
CHANNEL selector knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “UTC” or “Local.”
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode press the [16/9] key.
In Local time mode, the display shows the time by the 12-hour system. In UTC time mode
the display shows the time by the 24 hour system.
8.8 CHANGING COG TO TRUE OR MAGNETIC
Allows customising the NAV data showing GPS Course Over Ground (COG). Factory
default is True however following the steps below the COG can be changed to Magnetic.
1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.
2. Press the [ENT] key, then select “Magnetic” with the CHANNEL selector knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “On” (representing “Magnetic”) or “Off”
(representing “True”).
5. Press the [ENT] key to store the selected setting.
6. Turn the CHANNEL selector knob to select “Exit,” then press the [ENT] key to return
to the “Radio Setup” menu, select “Exit” and press the [ENT] key to return to radio
operation.
8.9 RECEIVER AUDIO TONE CONTROL
Allows the treble and bass of the speaker audio to be adjusted for the best acoustics in
Vertex Standard Co., Ltd.
11
