FCC ID: K6630283X3S
IC ID: 511B-30283X3S
GX5000S / GX5500S Operating Manual
[ENT] Key
Press the [ENT] key to enter the menu selection and/or keypad entry.
14.2 PA/FOG OPERATION
The VH-310 Handset is capable of controlling the 30W Public address, 4 fog horns, bells
and whistles.
14.2.1 Operating the PA / Hailer
1. Press the [F] key followed by the [8(PA)] key, activate the “PA / HAIL” mode.
2. Press the PTT switch and speak into the microphone.
3. To turn up the PA Volume, press the PTT switch and press the [p] or [q] keys to adjust
the Audio output level. The level can be set from 0 to 30W.
4. To adjust the listen back volume, (while in listenback mode) press the [VOL] Key,
then press the [p] or [q] key to the desired listen back volume.
To exit from the PA / Hailer mode, press the [F] key followed by the [8(PA)] key again.
14.2.2 Operating the FOG Horn
The GX5000S/GX5500S is capable of sending Underway, Stop, Sail, Tow, Horn, Siren,
Aground and Anchor signals.
1. Press the [F] key followed by the [9(FOG)] key, to activate the “FOG HORN” menu.
2. Select the one of the eight functions described above with the [p] or [q] key and press
the [ENT] key.
3. On the “Horn” and “Siren” modes, press the PTT switch to activate the tone through
the HAIL/PA speaker.
Press the [p] or [q] keys to adjust the Audio output level. The level can be set from 0
to 30W.
4. To adjust the listen back volume, (while in listenback mode) press the [VOL] Key,
then press the [p] or [q] key to the desired listen back volume.
To exit from the FOG HORN mode, press the [F] key followed by the [9(FOG)] key again.
14.3 INTERCOM OPERATION
14.3.1 Communication
1. Press the [F] key followed by the [5(IC)] key, the mode is changed to “INTERCOM”
mode.
2. If your GX5000S/GX5500S is equipped with two RAM+ Mic’s (or VH-310 Handset),
select the companion you wish to communicate (RADIO, RAM, or ALL) with the [p] or
Vertex Standard Co., Ltd.
63
