FCC ID: K6630283X3S
IC ID: 511B-30283X3S
GX5000S / GX5500S Operating Manual
channel before entering into the PA or FOG mode and receive DSC calls.
PA HAIL mode:
PA HAIL mode allows the transceiver to be used as a power hailer when an optional
STANDARD HORIZON 220SW or 240 SW HAIL/PA speaker is installed. The Hail mode
has a listen-back feature, which provides two-way communication through the HAIL/PA
speaker.
FOG HORN mode:
Automatic signaling is transmitted through the HAIL/PA speaker.
10.13.1 Operating the PA HAIL mode
1. Press the [PA/FOG] key (GX5000S), then select “PA” with the CHANNEL selector
knob.
2. Press the [ENT] key.
3. Press the PTT switch to speak through the
HAIL/PA speaker.
Rotate the CHANNEL selector knob to control the AF output level. The AF output
level can be set from 0 to 30 watts.
4. To exit the PA HAIL mode, press the [PA/FOG] (GX5000S) or [CLR] key.
10.13.2 Operating the FOG HORN mode
Operator can select from “Underway,” “Stop,” “Sail,” “Tow,” “Aground,” “Anchor,” “Horn,” or
“Siren.” Please refer to page 95 for FOG Horn Timing Chart.
1. Press the [PA/FOG] key (GX5000S), then select “Fog” with the CHANNEL selector
knob.
2. Press the [ENT] key.
3. Turn the CHANNEL selector knob to select the one of the eight functions described
above.
4. Press the [ENT] key.
5. On the “Horn” and “Siren” modes, press the PTT switch to activate the tone through
the HAIL/PA speaker.
Rotate the CHANNEL selector knob to control the AF output level. The AF output
level can be set from 0 to 30 watts.
6. To exit the FOG HORN mode, press the [PA/FOG] or [CLR] key.
10.14 NAVIGATION INDICATION
The transceiver has the ability to display Time, SOG, COG, as well as the position
Vertex Standard Co., Ltd.
27
