FCC ID: K6630283X3S
IC ID: 511B-30283X3S
GX5000S / GX5500S Operating Manual
12.14 FOG ALERT TONE FREQUENCY
This selection allows you to select the Alert Tone Frequency for the PA/FOG Operation.
Available selections are “200 Hz” through “850 Hz” in 50 Hz steps. The default Alert Tone
Frequency is 400 Hz.
1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.
2. Press the [ENT] key, then select “FOG Freq.” in the “Radio Setup” menu with the
CHANNEL selector knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select desired tone frequency.
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode press the [16/9] key.
12.15 RECEIVER AUDIO TONE CONTROL
Allows the treble and bass of the speaker audio to be adjusted for best listening in noisy
environments. The effect is similar to adjusting the treble and bass controls on a stereo.
1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.
2. Press the [ENT] key, then select “TONE CONT.” in the “Radio Setup” menu with the
CHANNEL selector knob.
3. Press the [ENT] key, then select “BASS” with the CHANNEL selector knob.
4. Turn the CHANNEL selector knob to select desired audio response in the lower
frequency range. Available selections are “–6” through “+6.”
5. Press the [ENT] key to store the selected setting.
6. Select “TREBLE” with the CHANNEL selector knob.
7. Turn the CHANNEL selector knob to select desired audio response in the higher
frequency range. Available selections are “–6” through “+6.”
8. Press the [ENT] key to store the selected setting.
10.
To exit this menu and return to radio operation mode press the [16/9] key.
13
ENHANCED RAM+ MIC OPERATION
When the RAM+ microphone is connected to the GX5000S/GX5500S, most VHF, DSC,
and setup menus can be remotely operated. The RAM+ Mic is supplied with 7 m of routing
cable and can be extended up to 21 m using three 7 m extension cables model CT-100.
The intercom operation can be used between the RAM+ Mic and the transceiver.
13.1 RAM+ MIC CONTROLS
Vertex Standard Co., Ltd.
53
