Standard Horizon CPN1010i, Owner'S Manual

Page: 112 / 188

CPN700i and CPN1010i Multimedia Chart Plotters Page 113
2. Press the key to close the DAM Report page and to go back to the About page.
In the DAM Report page the following information is displayed for each chart:
· Code and Name : shows the unique code and the name of the chart.
· Release Date : is the date when the chart was produced and issued.
· Programmed Date : is the date when the chart was programmed on the memory
support and the relative chart License was generated.
· Property Status : indicates if the chart is rented or sold or other:
Purchased (the cartridge is always enabled)
Rental (the cartridge is enabled until it expires)
None (the purchase type is not defined)
· Built-In Charts
1
:
Yes (the chart is stored in the CPN Series Chart Plotter memory, it could be also in
the remote CPN Series Chart Plotter)
No (the chart is on an external device, i.e. SD CARD)
· Networked Chart :
Yes (the chart is on the remote CPN Series Chart Plotter)
No (the chart is on the local CPN Series Chart Plotter)
· Warning Status : reports the specific warning message about the chart’s data.
· Segmentation : is the kind of data available: 4D, MAX, BASE, invalid chart, currently
content not supported.
1
For North America users only.
2.15 AIS
AIS is an Automatic Identification System. It has been introduced to improve the safety of
navigation by assisting in the efficient operation of ship-to-ship location reporting and VTS
applications. The system should enable operators to obtain information from the ship
automatically, requiring a minimum of involvement of ship’s personnel, and should have a high
level of availability. AIS transponders installed on IMO vessels use VHF frequencies to:
· Transmit details of their own vessel
· Receive details from other vessels or navigation aids within VHF range.
CPN Series Chart Plotters are able to display AIS Targets (for collision avoidance) on the
Chart page and AIS List pages when connected to an AIS Receiver (GX2100 or GX2150