Standard Horizon CP500 Owner'S Manual Download

Page: 75 / 126

Page 76

CP500

11.0.1 Transferring files to the optional User C-CARD

1. Remove a C-MAP B

EPPESEN

/MAX C-CARD if present and insert the optional User

C-CARD into the slot.

2. Press

[MENU]

. Move the ShuttlePoint knob to highlight

USER POINTS

and press

[ENT]

3. Move the ShuttlePoint knob to highlight

USER C-CARD

and press

[ENT]

4. Move the ShuttlePoint knob to highlight

SAVE

and press

[ENT]

5. A popup

SAVE FILE

window appears. In this window you can change the Name and the

file Type by using the ShuttlePoint knob.

6. To save the file, move the ShuttlePoint knob to SAVE in window and press

[ENT]

7. A Information pop window will momentarily be shown “SAVING” then show SAVING

OK.

8. Press

[ENT]

to confirm.

11.0.2 Loading a file

If you have a problem and accidentally loose the User Points in the GPS Chart Plotter with
the optional User C-CARD it is possible to load the data back into the GPS Chart Plotter
using the following procedure:
1. Press

[MENU]

. Move the ShuttlePoint knob to highlight

USER POINTS

and press

[ENT]

2. Move the ShuttlePoint knob to highlight

USER C-CARD

and press

[ENT]

. A screen will

appear.

3. Select the file from the User C-CARD list by using the ShuttlePoint knob and press

[ENT]

4. Move the ShuttlePoint knob to highlight

LOAD

and press

[ENT]

5. A “LOADING” message will momentarily be shown then a pop up Information window

show “LOADING...OK”.

6. Press

[ENT]

to confirm.

11.0.3 Deleting a file from the User C-CARD

You may want to delete a saved file on the User C-CARD.
1. Press

[MENU]

. Move the ShuttlePoint knob to highlight

USER POINTS

and press

[ENT]

2. Move the ShuttlePoint knob to highlight

USER C-CARD

and press

[ENT]

. A screen will

appear.

3. Select the file from the User C-CARD list by using the ShuttlePoint knob and press

[ENT]

4. Move the ShuttlePoint knob to highlight

DELETE

and press

[ENT]

5. A popup Warning window will to confirm you want to delete the file. Select

YES

and

press

[ENT]

to confirm (select

otherwise).

6. Press

[ENT]

to confirm.

11.0.4 Changing the User C-CARD

You may want to change the User C-CARD inserted in the slot with a new one.
1. Press

[MENU]

. Move the ShuttlePoint knob to highlight

USER POINTS

and press

[ENT]

2. Move the ShuttlePoint knob to highlight

USER C-CARD

and press

[ENT]

. A screen will

appear.

3. Open the door. Change the User C-CARD into the same slot or insert a new one into

the other slot.

4. Move the ShuttlePoint knob to highlight

CHANGE

and press

[ENT]

to confirm.

Summary of Contents for CP500































































































































Search results

Summary of Contents for CP500

Reviews:

Related manuals for CP500

Brands by name

Popular brands

Standard Horizon CP500, Owner'S Manual

Search results

Summary of Contents for CP500

Reviews:

Related manuals for CP500

Brands by name

Popular brands