Standard Horizon CP500, Owner'S Manual

Page: 18 / 126

CP500 Page 19
R
· Two NTSC or PAL Video Inputs
NTSC or PAL video inputs allowing a camera, DVD or VCR. To connect a video
source use the optional ACVC10 cable (3 pin to RCA phone adapter).
VGAC10
GPS ANT PWR & ACC 1 ACC 2 VIDEO OUT VIDEO IN 1 VIDEO IN 2
ACVC10
DVD Player
ACVC10
AVCV10 Video Adapter cable
CONNECTOR PINOUT
1 = GND
2 = PWR+
3 = SIGNAL
1
2
3
The CP500 has the capability to select the Video Input in three ways.
a) From the menu
1. Press [MENU] twice and move the ShuttlePoint knob to highlight VIDEO INPUT and
press [ENT] .
2. A menu appears with the following options:
. ACTIVATE VIDEO , the possible choices are Full Screen View, PiP (Picture in
Picture) View and Auto Switch (*).
- If Full Screen View is chosen, the GPS Chart Plotter will show a warning message
with the instructions to adjust the image from the Video Input. If the user agrees
to proceed, the image from the video input will be shown.
- If Picture in Picture (PiP) View is chosen, a Video Input image can be shown on
a window and placed over the selected page at full screen. By moving the
ShuttlePoint knob, the PiP image is moved. When the focus is on the PiP image,
press
[CLR] to close the PiP image.
- If Auto Switch is chosen, all the menus will be closed and the video input will be
shown switching between the Video Input Full View (if connected) and the selected