8.13 Saving data and reloading
1.
Connect a USB drive to the device.
2.
Simultaneously press
[Record]
and |
[Up]
for three seconds.
ð
The display shows
‘Saving File’
.
3.
Press one of the
[Fixture]
buttons to choose the file you want to save.
ð
The display shows
‘Writing’
.
Then a progress indicator bar appears in the display. If the LED of the
[Fixture]
button lights up, that means that the data for this DMX device has
already been saved on the connected USB drive.
4.
After file saving is complete, the display shows
‘Saved OK’
. Now all data is
stored on the USB drive in the file ‘CA-1616’.
1.
Copy the data to be loaded to a USB drive and connect this USB drive to the
device.
2.
Simultaneously press
[Record]
and |
[Down]
for three seconds.
ð
The display shows
‘Loading File’
.
If one of the
[Fixture]
buttons is lit, that means that the USB drive contains
data for this DMX device.
3.
Press one of the
[Fixture]
buttons to choose the file you want to load.
ð
The display shows
‘Writing’
.
Then a progress indicator bar appears in the display.
4.
After file loading is complete, the display shows
‘Loaded OK’
. The unit then will
automatically restart.
Saving data
Loading data
Instructions for use
DMX controller
42
