With this function, a bank containing several scenes will be inserted at the current
edit point into a chaser sequence.
1.
To enter ‘Program Mode’, keep
[Program]
pressed for three seconds.
2.
Press the
[CHASER]
of that chaser sequence you want to edit. You can only edit
one chaser sequence at a time.
If you select a chaser sequence that already contains scenes the edit
point automatically jumps to the end of the chaser sequence.
3.
Use |
[Up]
or |
[Down]
to select the bank you want to insert
4.
Press
[Music Bank Copy]
.
5.
Press
[Record]
.
ð
The LED flashes three times briefly.
This indicates that the scene has been inserted successfully.
6.
To return to ‘Play Mode’, keep
[Program]
pressed for three seconds.
With this function you can change the location where to insert new scenes or banks
into an existing chaser sequence.
1.
To enter ‘Program Mode’, keep
[Program]
pressed for three seconds.
2.
Press the
[CHASER]
of that chaser sequence you want to edit.
If you select a chaser sequence that already contains scenes the edit
point automatically jumps to the end of the chaser sequence.
3.
Press
[Tap Sync Manual Go]
.
ð
The display shows the current edit point.
4.
Use |
[Up]
or |
[Down]
to select the desired edit point.
For example, if you next want to insert a scene between the third and fourth
position of the chaser sequence, move the edit point until the display shows
‘C:1 P003’
.
Where C:1 is Chaser 1, and P003 is Step 3.
5.
Press
[Tap Sync Manual Go]
.
6.
Now you can insert scenes or banks in the changed edit point (
Ä
‘Inserting a
scene into a chaser sequence’ on page 22
).
7.
To return to ‘Play Mode’, keep
[Program]
pressed for three seconds.
Inserting a bank into a chaser
sequence
Changing the edit point of a chaser
sequence
Instructions for use
DMX-Master 3-FX
23
