A chaser sequence must be programmed before you can call it up (
Ä
‘Programming
Chaser sequences’ on page 22
). Empty chaser sequences can not be started.
1.
Press any of the
[Chaser]
buttons. If you press the button again, the chaser
sequence is deactivated.
2.
Make sure that the Auto Beat function and music control are deactivated.
ð
The selected chaser sequence is loaded and starts with its first step.
3.
Use
[Tap Sync Manual Go]
to skip to the next step.
Several chaser sequences can be selected at a time. Then they run in par‐
allel. At the end of the top line, the display shows the number of the cur‐
rently running chaser sequence.
1.
Press at least one of the
[Chaser]
buttons. If you press the button again, the
chaser sequence is deactivated.
2.
Press
[Auto]
.
ð
The LED
[Auto]
is lit.
3.
Adjust the playback speed with the
[FX Speed]
slider and the
[Fade Time]
slider
or using the button
[Tap Sync Manual Go]
.
Several chaser sequences can be selected at a time. Then they run in par‐
allel. At the end of the top line, the display shows the number of the cur‐
rently running chaser sequence.
Manually calling up a chaser sequence
Chaser sequence playback with Auto
Beat
Instructions for use
DMX-Master 3-FX
37
