You can use the two jog wheels in both ‘Play Mode’ and ‘Program Mode’. The respec‐
tively assigned DMX channels change with the currently controlled DMX device
according to the association that you've made.
Use the
[Fine]
button to determine whether turning the jog wheel sends out one
DMX step
[Fine]
on) or eight DMX steps (
[Fine]
off).
8.10 Playback
1.
Make sure that the device is in ‘Play Mode’ and that the LED
[Manual]
is lit.
2.
Use |
[Up]
or |
[Down]
to choose the bank that includes the scene.
3.
Press any of the
[Scene]
buttons.
Use
[Tap Sync Manual Go]
to skip to the next scene available. This function is
also available for music control and playback with auto beat. This allows a
scene to be ‘detached’ during a quiet passage of music.
Using this function, a bank made of saved scenes or a chaser sequence is played back
in an endless loop.
1.
Press
[Auto]
.
ð
The last stopped auto beat is automatically used and appears in the dis‐
play.
The LED
[Auto]
is lit.
2.
Use |
[Up]
or |
[Down]
to choose the bank from which the corresponding
scenes are to be played in auto mode.
3.
Set the playback speed using the
[FX Speed]
slider.
The set time is shown in the display Maximum is 5 minutes.
4.
Set the fade time using the
[Fade Time]
slider. It determines in steps from 0 to
255 how fast the device fades from one step to the next. The longest fade time
is 30 seconds. Smaller movements are executed faster.
5.
To cancel the Auto Beat function, press again
[Auto]
.
Using Jog Wheels
Calling up a scene manually
Bank playback with Auto Beat
Instructions for use
DMX-Master 3-FX
35
