1.
Press
[Music Bank Copy]
.
ð
The last set sound sensitivity is automatically used and appears in the dis‐
play.
The LED
‘Music’
is lit.
2.
Use |
[Up]
or |
[Down]
to choose a bank.
The assigned scenes of the bank are being called up music-controlled one after
the other.
3.
Use the slider
[FX Speed]
to adjust the responsiveness of the sound control
between ‘fast’ and ‘slow’. Thereby, ‘slow’ reacts relatively sensitively, ‘fast’ rela‐
tively insensitively.
With this setting, the sensitivity of the built-in microphone is not directly
changed (the hardware controls that automatically), but the response to the
music. The setting determines how far apart two bass beats must be to trigger
the device. Once you connect an audio device to the
[AUDIO]
connector, the
built-in microphone is turned off and the signal of this input is used for music
control instead.
When switching on, the responsiveness is set to ‘normal’, which represents a
good starting point that fits most often.
4.
Set the fade time using the
[Fade Time]
slider. It determines in steps from 0 to
255 how fast the device fades from one step to the next. The longest fade time
is 32 seconds. Smaller movements are executed faster.
5.
To turn the music control off, press again
[Music Bank Copy]
.
Use
[Tap Sync Manual Go]
to skip to the next scene available. This function is also
available for playback with auto beat. This allows a scene to be ‘detached’ during a
quiet passage of music.
During automatic playback, you can use sliders to override the automatically gener‐
ated values. This allows you to make minor changes in live operation without having
to reprogramme scenes.
Proceed as follows, to override channels manually with the sliders:
1.
Make sure that the unit is in ‘Play Mode’.
2.
Press the
[Fixture]
button assigned to the respective DMX device. Multiple
devices may be selected at a time.
3.
Set the desired output values using the respective sliders.
4.
Use
[PAGE]
to switch between channels 1…8 and 9…16.
5.
Repeat steps 2 to 4 until all settings match your requirement.
6.
The settings made will override the preprogrammed values. They are main‐
tained until you press
[Release]
.
Bank playback with music control
Manually overriding channels with
the sliders
Instructions for use
DMX controller
36
