251986 / 6118602300
2019-03-07·BA00·III·en·03
Technical data
9
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Compact Sheet-steel
Emergency Light Fitting
Series 6118/1
Alternative material:
Enclosure:
• brushed stainless steel S304 (1.4301 or V2A)
For further technical data, see r-stahl.com.
Mounting / Installation
Cable glands
1x M20/M25 left and 2x M20/M25 right, 2x cable glands and 2 stopping plugs
as standard
Connection
Spring clamp terminal 0.5 to 4 mm2
4-pole (2 x L1, 2 x L‘, 2 x N, 2 x PE)
6-pole (2 x L1, 2 x L‘, 2 x L2, 2 x L3, 2 x N, 2 x PE)
Screw terminal
0.75 to 4 mm
2
solid / stranded
0.75 to 6 mm
2
solid
4-pole (2 x L1, 2 x L‘, 2 x N, 2 x PE)
6-pole (2 x L1, 2 x L‘, 2 x L2, 2 x L3, 2 x N, 2 x PE)
Through wiring
Loop in/loop out possible up to 12 A max.
Assembly
Wall mounted luminaire
M8 threads on both sides of the luminaire for mounting of wall mounting
brackets.
Recessed light fitting:
Variant 1: mounting frame attached to enclosure using M6 screws
Variant 2: mounting frame welded to enclosure
Note:
For both installation versions, the luminaires must either be mounted on the
back or the sides of the luminaire using the M8 threads.
Emergency light electronics
Emergency light
mode
In case of power failure the lamp is supplied by the battery
Emergency light
service time
at optimal ambient temperature of the battery:
Switchover voltage
from mains to battery operation at U < 0,74 x U
N
from battery to mains operation at U > 0,8 x U
N
Battery set
Version
NICd battery, gas tight, built into light fitting
Operating voltage
6 V
Capacity
2.5 Ah
Replacing the battery
set
When central lock is opened battery set is de-energized;
it can be removed from the housing by unplugging its removable contact
Technical Data
Battery capacity Emergency light operation time Emergency light output
8 W
2.5 Ah
1.5 h
70 %
3.0 h
30 %
Summary of Contents for 6118/1 Series
Page 31: ......
