Stack ST8380 User Manual Download Page 36 | Manualshive

Page: 36 / 48

Stack ST8380 User Manual Download Page 36

Troubleshooting

STACK Digital Video Recorder

30

Users Guide

Manual recording status control

Additionally, recording can be initiated by either the V/VS Video
Controller ‘Record’ button or by the DVR Recorder Switch.
The Video Controller’s ‘Record’ button causes the V/VS module’s
recording output to toggle, ie, press it once to start recording and
press again to stop recording.
The V/VS module’s recorder control output is wired in parallel
with the DVR record switch such that either the V/VS output or
the DVR record switch can cause the DVR to start recording.
To stop the DVR recording both the V/VS output and the DVR
record switch must be off to stop recording.

Recording Lamp

The DVR recording status output is directly connected to both the
DVR Recording Lamp and the V/VS Video Controller lamp.
When the DVR is recording, both lamps will be illuminated.

It is not necessary to connect the Recording Lamp when using the
Video Controller.

«
...
34
35
36
37
38
...
»

Summary of Contents for ST8380

















































Reviews:

No comments