ST STM32CubeF4, User Manual

Page: 54 / 111

Demonstration functional description (STM324x9I-EVAL, STM324xG-EVAL, STM32F429I-Discov-
54/111 DocID026161 Rev 4
8.1.3 Process viewer
The process viewer ( Figure 42 ) allows users to check and to display the status of the
currently running tasks (FreeRTOS) at any time during the demonstration run time. It shows
the following information:
1.
Current running tasks names.
2. Current running tasks priorities
3. Running tasks states (FreeRTOS statics information).
Figure 42. Process viewer
8.2 Modules
8.2.1 System
Overview
The system module provides three control tabs: system information, general settings and
clock settings to set the global demonstration settings. The system module retrieves
demonstration information from internal kernel settings data structures and acts on the
several kernel services to changes settings.
Functional description
The system module provides three graphical views:
a) Demonstration global Information ( Figure 43 )
This first page shows the main demonstration information such as: Used board,
STM32 core part number, and current CPU clock and demonstration revision.
b) General settings ( Figure 44 )
The general settings tab permits to change the global demonstration configuration.
Note that the new settings are not applied immediately; new settings take effect
after restarting the demonstration.