Demonstration customization and configuration
UM1743
42/111
DocID026161 Rev 4
Figure 34. Calibration steps
Once this runtime calibration is done, the touch screen calibration parameters are saved to
the RTC Backup data registers: RTC_BKP_DR0 and RTC_BKP_DR1, so the next time the
application is restarted, these parameters are automatically restored and there is no need to
re-calibrate the touchscreen.
Note:
The touch screen calibration step is not needed for STM32F479I-EVAL and
STM32F469-DISCO demonstrations.
5.4 BSP
customization
5.4.1 SDRAM
configuration
The SDRAM capacity is 1 Mbyte x 32 bits x 4 banks. The BSP SDRAM driver offers a set of
functions to initialize, read/write in polling or DMA mode.
069
R
7RXFKVFUHHQKDVEHHQ
FDOLEUDWHG3OHDVHXVH
WKHFXUVRUWRWHVW
WKHFDOLEUDWLRQ
7RXFKVFUHHQ&DOLEUDWLRQ
$WILUVWWLPH\RXQHHGWR
FDOLEUDWHWKH7RXFKVFUHHQ
3OHDVHSUHVVWKH7RXFK
VFUHHQWRFRQWLQXH
3UHVVKHUH
XSSHUOHIWSRVLWLRQ
5XQWLPHFDOLEUDWLRQ
3OHDVHWRXFKWKHVFUHHQ
DWWKHFHQWHURIWKHULQJ
R
5XQWLPHFDOLEUDWLRQ
3OHDVHWRXFKWKHVFUHHQ
DWWKHFHQWHURIWKHULQJ
3UHVVKHUH
ORZHUULJKWSRVLWLRQ
